Keypads - Motorola MC67 User Manual

LED Indications (Continued)
Table 2-1
Flashing Green
Solid Red (after Safe Battery Swap mode)
Off
Charging/Battery Status LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber
Off
WAN Radio Status LED
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
radio status and settings, see

Keypads

The MC67 offers six keypad configurations: Numeric, QWERTY, AZERTY, QWERTZ, Direct Store Delivery
(DSD) and Personal Information Manager (PIM).
MC67 Numeric Keypad
Figure 2-4
Refer to Appendix B, Keypads
LED State
Chapter 4, Making
for detailed information on the keypad configurations.
Indication
Software initiated notification.
MC67 is shutting down for battery replacement.
Data capture not enabled.
Main battery in MC67 is charging.
Main battery in MC67 is fully charged.
Charging error.
MC67 not charging.
RF (WAN) radio is on.
RF (WAN) radio is off.
Chapter 3, Data Capture. For information about WAN
Calls, or refer to the MC67 Integrator Guide.
Using the MC67 2 - 3