Maintenance Menu - JRC JLR-20 Instruction Manual

5.4 Maintenance Menu

Use the Main Menu to confirm or change function settings.
Press and hold both
Procedure
1. While holding down the
2. Use the
Memo
The Maintenance Menu disappears if one of the following is done.
• The
• The power is turned off.
The following submenus are available.
• ANT CHECK:
• INPUT CHECK:
• DIAGNOSIS:
• DEMO:
• PRODUCT TYPE:
• RESET:
• SOFT UPDATE:
and for 3 seconds or more to display the Maintenance Main Menu.
key, press and hold the
keys to select an item, and press the
key is pressed.
(Refer to 5.4.1) Displays sensor information.
(Refer to 5.4.2) Displays input information.
(Refer to 5.4.3) Performs self-diagnosis on equipment.
(Refer to 5.4.4) Initiates equipment demonstration.
(Refer to 5.4.5) Sets unit as subdisplay,confirm the equipment number.
(Refer to 5.4.6) Restores all settings to their factory defaults.
(Refer to 5.4.7) Updates software.
Press and hold both
Maintenance Main Menu
key for 3 seconds or more.
key.
and
5-27