Basic Operation; Turning The Unit On; Startup (Standard) - JRC JLR-20 Instruction Manual

5.2 Basic Operation

5.2.1 Turning the Unit On

Press the key to turn the power on, the system starts initialization.
Once initialization has been completed, self-diagnosis will run when the equipment condition has been
checked, the screen switches to the standard screen.
Attention
If the unit cannot be turned on, check the main power supply and the connection of display unit
cable.
Unit Initialization
Memo
Press the key to break the self-diagnosis and display the standard screen.

5.2.1.1 Startup (Standard)

If the self-diagnosis results are all "OK", the unit automatically switches to the standard screen.
Self-Diagnosis Screen
OK
OK
OK
OK
OK
OK
OK
OK
OK
Self-Diagnosis Screen
OK
OK
OK
OK
OK
OK
OK
OK
OK
Display Unit
Diagnosis
Sensor Diagnosis
Standard Screen
5-3