Beacon Settings (Beacon) - JRC JLR-20 Instruction Manual

5.3.5 Beacon Settings (BEACON)

Selecting BEACON
From this screen, the parameters can be confirmed.
Procedure
1. Press the
2. Press the
The following submenus are available.
• STATION SELECT:
• BIT RATE:
• FREQUENCY:
• BEACON INFORMATION: When set to ON, received data is displayed as is.
Memo
• Press to return to the Main Menu.
• In Maintenance Mode settings can be changed press and hold both
seconds or more to go to the mode.
• This setting, even if changed, is disabled if a beacon receiver is not connected.
• If BEACON INFORMATION is set to ON, pressing the
following screens.
BEACON INFO Screen →
5-20
from the "5.3 Main Menu" displays the Beacon Settings Screen.
Beacon Settings Menu
keys to move the cursor and select an item.
key to display the menu for the selected item.
Select either manual or automatic selection of beacon station.
Select the bit rate of received data.
(Available only when STATION SELECT is set to manual mode)
Select the frequency of received data.
(Available only when STATION SELECT is set to manual mode)
SAT INFO2 Screen →
and
key cycles through the
SAT INFO1 Screen
for 3