Download Print this page

JRC JLR-20 Instruction Manual: Cable Connection

Gps compass.
Hide thumbs

Advertisement

2.3

CABLE CONNECTION

● Unit (Rear Connector)
Maintenance Terminal
Used to connect to a computer (RS-232C).
(Shall be used by service engineer only.)
DC12/24V
Power Supply Terminal
Used to supply power to the equipment.
Use the included power cable.
2-12
DATA IN/OUT 1
External Device Connection Terminal (For Serial
Transmission)
Used for connecting equipment such as radar.
SENSOR
Sensor Connection Terminal
Used for connecting the dedicated GPS compass sensor.
E
Chassis Ground Terminal
Connect to the ship's ground terminal as needed.
DATA IN/OUT 2
CONTACT IN/OUT
External Device Connection Terminal
(For Contact Signal)
Interfaces to optional equipment such as an external
buzzer.

Advertisement

   Related Manuals for JRC JLR-20

   Related Content for JRC JLR-20

This manual also for:

Jlr-30

Comments to this Manuals

Symbols: 0
Latest comments: