Software Update (Soft Update) - JRC JLR-20 Instruction Manual

5.4.7 Software Update (SOFT UPDATE)

Selecting SOFT UPDATE
screen.
Procedure
1. Press the
key to confirm.
2. Select the transmission speed (bit rate). (Selection is automatic for sensor)
3. Press the
key.
Displayed when
preparation is complete:
* Once the preparation completed message is displayed, you cannot return to the standard screen.
If you do not intend to update the software, reboot the system.
4. Connect a computer, and transfer the program.
The following submenus are available.
• UPDATE AREA:
• BIT RATE FROM PC:
Memo
• Press to return to the Main Menu.
• Please contact JRC or an affiliate regarding software updates.
5-36
from the "5.4 Maintenance Menu" displays the software update selection
Software Update Menu
key, use the
keys to move the cursor to
STANDBY OK
CONTROL A PC, TRANSMIT SOFTWARE!!
CAN USE ONLY "DIM" + "PWR" KEY
Select the area for the update (DISPLAY/SENSOR).
Select the update transfer speed.
keys to select the area to be written to, and press the
UPDATE STANDBY , and press the