System Settings - JRC JLR-20 Instruction Manual

5.3.6 System Settings

Selecting SYSTEM
Procedure
1. Press the
2. Press the
The following submenus are available.
• TIME DIFF:
• DATE DISP:
• TIME DISP:
• DATUM:
• SPEED UNIT:
• ROT RANGE:
• ROT SMOOTHING:
• ROLL/PITCH RANGE: Select the maximum value for the roll/pitch graph shown on Compass
• ROLL OFFSET / PITCH OFFSET:
Memo
• Press to return to the Main Menu.
• In Maintenance Mode settings can be changed press and hold both
second or more seconds), settings can be changed.
from the "5.3 Main Menu" displays the System Settings Screen.
System Settings Screen
keys to move the cursor and select an item.
key to display the menu for the selected item.
Enter the time difference from UTC in order to display the local time.
Japanese Standard Time is UTC +9 hours, so enter "+9:00".
If this is set, local time (indicated with an "L") is displayed.
Select among DD-MM'YY, 'YY-MM-DD, or MM-DD'YY date display types.
Select 24 hour or 12 hour time display.
Select from the Geodetic System Table (Appendix 1).
Select from kt, km/h, or mi/h.
Select one of the following based on the turn rate of the ship.
(30,60,90,120,150,180,210,240,270,300,600,900,1200,1500,1800, 2100,
2400, 2700)
Select from 0 to 99 seconds.
Screen D.
Normally, this should be left at the default value of 10º.
Used when the roll / pitch graph shown on Compass Screen D is to be
centered around the ● symbol. (Roll and pitch data output to external
devices is also offset)
and for 3
5-21