Appendix 2 Data Output Formats - JRC JLR-20 Instruction Manual

Appendix 2 Data Output Formats

[1] Data Sentences
1. Sentences are not necessarily output in the order shown. Make sure that sentences can be
received in any order.
2. The length of each sentence is variable. Make sure that sentences of any length can be
received.
NMEA0183 Output Sentences
HDT:
THS:
ROT:
ZDA:
GGA:
VTG:
RMC:
GBS:
DTM:
GSA:
GSV:
GNS:
MSS:
GST:
GLL:
[2] Protocols
NMEA Protocol
Bit Rate:
Data Bit:
Parity:
Start Bit:
Stop Bit:
Transmission Interval:
Some combinations of bit rate, transmission interval, and number of sentences are not possible.
In such a case, increase the transmission interval or configure the equipment to output the
minimum required sentences only.
Heading, true
True bearing with status
Rate of turn
Time and date
Global positioning system fix data
Track made good and ground speed
Recommended minimum specific GPS/TRANSIT data
GPS satellite fault detection for RAIM
Datum reference
GPS DOP and active satellites
GPS satellites in view
GNSS fixed data
Beacon receiver status
GPS pseudorange noise statistics for RAIM
Geographical position, latitude/longitude
4800, 9600, 19200, 38400, 57600bps (select one)
8 bit
None
1 bit
1 bit
20ms, 25ms, 50ms, 100ms, 200ms, 500ms
1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s (select one)
Appendix 2-1