Setting Message Pop-Up Notifications - Digimerge DH100 Series Instruction Manual

CMS-DH Central Management Software

Setting message pop-up notifications

You can configure CMS-DH to produce message pop-up windows when an event occurs.
To configure CMS-DH to produce message pop-up events:
1. Expand the menu tree under the desired DVR that you wish to configure.
2. Right-click on the camera you wish to set alerts for, and click Post Event Action.
3. In the Events drop-down menu, select the type of event that will trigger CMS-DH to produce a
pop-up window when an event is detected.
4. In the Device drop-down menu, select the System.
5. Under the Sub Type drop-down menu, select Window. Under the Command drop-down menu,
select Alert Window.
6. Click Apply and then click OK.
76