Digimerge DH100 Series Instruction Manual page 56

CMS-DH Central Management Software
3. Click on the DVR you wish to add to CMS-DH, and then click Apply>OK.
• The DVR appears on the left panel.
4. Click on the DVR you want to connect, and click the Offline button.
5. Double-click the name of the DVR to connect to the system.
NOTE: To add another DVR from the network, you must click the Online button to disconnect
the DVR. Then repeat steps 1-5 to add the new DVR.
46
If you have changed the default password of the DVR,
you must select the DVR from the list, then manually
re-enter the new password in the Password field, and
then click Apply and then OK.
Apply Ok
2. Click the Offline button
1. Select the DVR you want to connect.
Double-click to connect to DVR