Appendix J: Using Listen-In Audio - Digimerge DH100 Series Instruction Manual

Appendix J: Using Listen-in Audio

APPENDIX J: USING LISTEN-IN AUDIO
Listen-in audio allows you to listen to, and record live audio on the system.
DVR*
AUDIO CAPABLE CAMERAS
(not included)
LINE OUT / AMPLIFIED SPEAKERS
(not included)
*8-channel model shown.
To enable listen-in audio:
1. Connect the audio cable (RCA) from an audio capable camera (not included) to the AUDIO IN
port on the rear panel of the system.
2. Open the MAIN MENU and clickSystem Setup>Device Setup>AV Output Setup.
3. Drag the volume slider to the desired level.
4. Right-click and click Yes to save your settings.
To configure the camera volume:
1. Open the MAIN MENU, and click Camera Setup.
2. In channel 1, drag the Volume slider to the desired audio level.
3. Right-click and click Yes to save your settings.
120