Control systems
COMAND FM/AM radio
i
If you enter a frequency in the AM waveband
which is outside the frequency range, COMAND
tunes in to the next lowest frequency.
Selecting channels using the channel
list
i
This function is only available for Weather
Band.
Select "Audio"
"Audio"
Radio"
"WB"
"Channel".
or
Press n when the main area is select-
ed.
The channel list appears. The dot R in
front of a list entry indicates the cur-
rently selected channel.
Select channel by rotating
qmr
and press n.
sliding
Saving stations
i
Twenty stations can be saved in each wave-
band except for Weather Band.
96
You have the following options:
Saving stations manually
Saving stations using Autostore
Saving stations manually
Option 1
Select "Audio"
"FM/AM
Radio"
Select "Radio "
Option 2
Press n when the main area is select-
ed.
Option 3
ymz
or
Select "Audio"
Radio"
Select "Presets".
All three of these will call up a station
preset screen. The dot R in front of a
preset position indicates that the cur-
rently selected station is saved there.
"Audio"
"FM/AM
"FM" or "AM".
"Save Station".
"Audio"
"FM/AM
"FM" or "AM".
Selecting a preset position:
qmr
or rotate ymz.
Slide
Saving a station to a selected preset po-
sition
If you have called up the station preset
screen using option 1:
Press n briefly.
In options 2 and 3:
Press and hold n until you hear a sig-
nal.
The station is saved.