♦ Wear indicator -1- is located on the centre of the brake disc
contact area.
♦ Wear indicator -2- is located close to the internal edge of the
brake disc.
Note
If the front brake disc wear indicator markings (visual check)
♦
cannot be visualized due to wheel design, the wheels must be
removed.
If the front wheels must be removed to check the brake discs,
♦
after reinstalling them, tighten the screws to 120 Nm.
Checking conditions of front brake disc wear:
1 -
Wear indicators -1- and -2- are visible:
The brake discs need not be replaced.
2 -
Only wear indicator -2- is visible:
The brake discs do not require replacement, but be aware if the
next change is close.
3 -
No brake disc wear indicator is visible.
FOX 2004 ➤
Maintenance - Edition 07.2010
4. Service descriptions
71