Volkswagen FOX 2004 Service Manual page 101

– Check if the light-dark limit reaches the adjustment line and
runs vertically over the entire measuring device line.
Note
The light-dark separation mark is the measurement from the
♦
ground to the centre of the headlight minus 5.00 cm in for 10.94
yd of distance.
The light-dark separation mark is the measurement from the
♦
ground to the centre of the headlight minus 0.98 in in for 5 m
of distance.
Additional headlights:
– Additional headlights from other systems, installed afterwards,
must be installed according to their instructions.
4.41.3 Adjust the headlights
Main headlights
Main right headlight (the left headlight adjustment screws are
positioned symmetrically).
– Adjust the headlights from the front, with a suitable Philips
wrench.
On the left headlight, both set screws are arranged symmetrically.
Note
Please check also if both headlights move symmetrically when
positioning the light range.
Fog lights
– To reduce the beam focus, turn the setscrew to the right. A
side adjustment is not expected.
On the left headlight, the setscrew is arranged symmetrically.
FOX 2004 ➤
Maintenance - Edition 07.2010
4. Service descriptions
97