Volkswagen FOX 2004 Service Manual page 19

Service for vehicles with "service based on time and kilometers traveled"
– Sunroof: check operation, clean the guide rails and lubricate them with Spe‐
cial grease -G 000 450 02- .
♦ at every 30,000 km
♦ for Europe on vehicles model ▸2007 and except Europe on vehicles model
▸2008
♦ every 60,000 km or 3 years and after every 2 years
♦ for Europe in model 2008▸ vehicle and in model 2009▸ vehicles elsewhere
Tyres and wheels
– Spare wheel tyre: check the state of tread, sides and depth of grooves _____
mm.
– Left front wheel tyre: check the state of tread, sides and depth of grooves
_____ mm
– Left rear wheel tyre: check the state of tread, sides and depth of grooves
_____ mm.
– Right rear wheel tyre: check the state of tread, sides and depth of grooves
_____ mm.
– Front right wheel tyre: check the state of tread, sides and depth of grooves
_____ mm.
– Tyres: calibrate, including the spare wheel.
Underside of the vehicle
– Engine oil: drain or aspirate
– Engine and components in engine compartment (from below): perform a
visual check for leaks and damage.
– Poly-V belt: check state.
♦ at every 37,282.27 mi
♦ for Europe on vehicles model ▸2007 and except Europe on vehicles model
▸2008
♦ every 60,000 km or 3 years and after every 2 years
♦ for Europe on vehicles model 2008▸except Europe on vehicles model
2009▸.
– Transmission: check for damage and leaks, including the state of the con‐
stant velocity joint bellows.
– Mechanical transmission: check the oil level.
♦ at every 18,641.14 mi
♦ for Europe on vehicles model ▸2007 and except Europe on vehicles model
▸2008
♦ every 60,000 km or 3 years and after every 2 years
♦ for Europe on vehicles model 2008▸ and except Europe on vehicles model
2009▸.
– Brake system: perform a visual check for leaks and damage.
– Rear pads and linings: check the thickness.
– Brake discs: check the level of wear and corrosion
– Lower floor protection: make a visual inspection for damage.
– Steering bar swivel tips: check the clearance, fastening and state of pro‐
tection bellows.
– Front suspension arm joints: check for fastening and clearance, as well as
for damage and leakages in sealing bellows.
FOX 2004 ➤
Maintenance - Edition 07.2010
Service
⇒ page 46
⇒ page 54
⇒ page 53
⇒ page 53
⇒ page 53
⇒ page 53
⇒ page 53
⇒ page 58
⇒ page 65
⇒ page 65
⇒ page 66
⇒ page 66
⇒ page 67
⇒ page 67
⇒ page 69
⇒ page 73
⇒ page 73
⇒ page 76
2. Service plans
15