FOX 2004 ➤
Maintenance - Edition 07.2010
– Enter in positions -1...7- the vehicle's data included on the ve‐
hicle's documentation.
♦ -1- Vehicle's manufacturer: "for example VOLKSWAGEN —
VW"
♦ -2- Type of vehicle: "for example, 1J"
♦ -3- Code number for 2: "z.B. 0603"
♦ -4- Code number for 3: "for example 358"
♦ -5- Engine identification letters "for example, AQY"
♦ -6- License plate: "for example WOB-HH 1234"
♦ -7- Vehicle identification number: "for example
WVWZZZ1JZYW123456"
– Enter in the space - 8 - the kilometers traveled "for example,
32000".
Note
With the Skip key, it is possible to call new functions.
♦
With the Skip key, it is possible to interrupt the test.
♦
Entering nominal data for the exhaust gas test:
Note
If the nominal values do not exist as barcode, they must be
♦
entered manually.
All conditions for test and data necessary for the exhaust gas
♦
test are included on the exhaust gas test datasheet for the
respective engine.
Manually entering nominal data for the exhaust gas test:
– Follow the indications on the display during the manual data
entering.
– With "Inspection values for the exhaust gas test" on the
screen, enter successively the values displayed on the ex‐
haust gas test datasheet:
1 -
Test rotation (idle speed rotation)
2 -
Period of catalytic converter heating
3 -
Engine temperature
4 -
Increased idle speed rotation
5 -
Content of CO with high idle speed rotation
6 -
Lambda with high idle speed rotation
7 -
Idle speed operation
8 -
Select the type of probe adjustment: "Enrichment probe" or
"Broad range probe" - 1 -.
9 -
Lambda probe value
– After entering all data correctly, press the "Continue" key
-arrow-.
110
5. Additional tasks due to country legislation