♦ Torque wrench - 5 to 50 Nm (fit. 1/2") -VAG 1331-
Carry out work sequence as follows:
– Press the locks and tilt the positive battery pole cover
-arrow-
– With alternate movements of the positive and negative battery
cables, check if the terminals -arrows- are firmly fastened to
the battery poles.
WARNING
If the terminal is not firmly fastened to the battery pole, first you
must disconnect the terminal connected to the negative battery
pole to avoid risk of accidents.
If the terminal is not firmly fastened to the positive battery pole:
FOX 2004 ➤
Maintenance - Edition 07.2010
4. Service descriptions
41