Table of Contents
Advertisement
4.4
Setting the Receiver Channel
The wireless receiver is capable of receiving up to 4 separate channels. The front of the
wireless receiver has 4 LEDs representing the 4 channels of the receiver. When lit, the
LED will indicate which channel is currently being displayed. In the diagram below CH1
is lit up indicating channel 1 will be displayed on the screen.
The wireless receiver allows you to manually switch between active channels by pushing
the SET button. (The orientation of the channels when pressing the 'SET' button each
time is CH1 to CH2 to CH3 to CH4 and back to CH1).
4.5
Night Vision
The Camera has built-in Infra-red LEDs to allow you to view up to a distance of 7m at night
for 24hrs surveillance. The LEDs will automatically activate at night and the picture
viewed will turn to black and white.
4.6
Camera and Interference
The wireless camera operates on the 2.4GHz frequency. Some devices such as wireless
broadband routers, microwaves, cordless phones can cause interference and affect picture
quality as they use the same frequency. If you are experiencing interference or poor image
quality try the following steps:
- move or orient the camera in a different location.
- adjust the receiver's antenna.
- limit the number of walls, floors between the camera and receiver as this can
dramatically alter picture quality.
(Optional)
CH1 CH2 CH3 CH4
Channel Indicator Lights
10
Channel SET Button
SET
Advertisement
Table of Contents
