Alphanumeric Display - Nortel DMS-100 Series Installation, Operation And Maintenance Manual

3-2 Operations and features

Alphanumeric display

The M5316 display screen allows access to the following features:
Called Number Display/Called Name Display
The display of the called number (or name of the party being called, when
available) is always activated as dialing takes place.
Calling Number Display/Calling Name Display
The calling number (or name of the calling party, when available) for calls
originating within the same switch is displayed when the first ringing tone
sounds for an incoming call at the Prime DN. If the incoming call terminates
at a secondary DN, the number is displayed only after lifting the receiver.
Query Time and Date
One of the feature keys must be assigned for accessing the QTD display.
That key should be labelled Time/Date for easy identification.
Feature programming and usage
The display screen shows important information and prompts when using or
programming M5316 features.
297–2011–214 02.01 Standard February 1999