Priority Channel - Icom IC-A110EURO Instruction Manual

5
OTHER FUNCTION
D Priority channel
The priority channel is used to store your most often-used
channel for quick recall. In addition, the priority channel is
monitored during priority scan modes. The default setting for
the priority channel will differ, depending on pre-program-
ming.
➥ Push [PRI] to toggle the prior-
ity channel mode or previous
mode.
11
• Setting the priority channel
q While holding down [V/M] and [TS](DIAL), push [POWER]
to turn ON the power.
• The transceiver enters the
Initial Set mode.
w Push [TS](DIAL) to select
the priority channel Set
mode.
e Rotate [DIAL] to select the
desired channel number
as a priority channel or
OFF.
r Hold down [POWER] to
turn OFF the power.
NEVER select the blank memory channel as the priority
channel. In such a case the priority function is automati-
cally set to the OFF position.