3-Thread Rolled Hem - Bernina Serger User Manual

Medium weight fabric, 4" x 6"
Fabric:
80/12 Universal
Needle:
3 cones of serger thread (blue, red, green)
Thread:
Optional: Woolly Nylon thread for upper looper
Standard
Presser Foot:

3-thread Rolled Hem

Stitch:
Using the small screwdriver and brush/needle insertion tool,
remove the left needle. Snug the needle set screw after
removing the needle.
Thread the serger for a narrow 3-thread overlock stitch using
thread colors to match the color-coded threading path on the
serger. Adjust all thread tension settings for a rolled edge as
indicated below.
Pull the Stitch Selection Lever toward you.
Place the fabric under the presser foot and serge along one 6"
edge.
Return stitch length and thread tension levers to normal.
Return the Stitch Selection lever to normal sewing position.
Optional: Thread the serger for a 3-thread rolled edge (right
needle) with Woolly Nylon in the upper looper. Because of the
stretch of the Woolly Nylon thread, the tension of the looper may
need to be loosened. Serge the edge opposite of the previously
stitched rolled edge.
3-Thread Rolled Hem
Suggested Settings
Upper Looper ····························· 3-5
Lower Looper ····························· 7-9
Left Needle ································ N/A
Right Needle ······························ 3-5
Stitch Length ······························ 1-1.5
Cutting Width ····························· 2-3
Differential Feed ························ N
19