Preset - Ganz ZC-PT Series Indoor User Manual

User's Manual
3.3.12

PRESET

• PRESET SET
Totally 256 preset points can be set. Follow the steps below when in the
preset setting menu.
STEP 1: Press the right/left key on the keyboard to select a number (1
STEP 2: Press the <CAMERA MENU> key (ENTER) on the keyboard,
STEP 3: Press the <CAMERA MENU> key again to save the defined
Once completing setup of a preset point, users could move the cursor to
the next item to run the preset point.
• PRESET RUN
Select the preset point that you want to execute. After pressing "ENTER",
the camera will turn to the appointed point.
• EXIT
Exit the PRESET menu and go back to the MAIN PAGE 2 to carry on
setup of sequence.
ID DISPLAY
TITLE DISPLAY
TITLE SETTING
PRESET
SEQUENCE
AUTOPAN
CRUISE
HOME SETTING
represents preset point 1, 2 represents preset point 2, etc.)
and then rotate the PTZ Camera to a targeted shooting
area/point.
preset point.
MAIN PAGE 2
ON
OFF
01
ENTER
ENTER
ENTER
ENTER
ENTER
NOTE: Users could set preset points through a keyboard. Please
refer to the control keyboard's quick guide for further information.
33