Ganz ZC-PT Series Indoor User Manual page 37

2. Move the PTZ Camera to a desired position and press <ENTER> to
• END POINT
Users are able to set the end point after the start point is defined. Pan the
PTZ Camera to another position and press <ENTER> to save the position
as the end point.
• DIRECTION
The item is for setting the AUTOPAN direction of the PTZ Camera. The
camera will start to pan clockwise from the start point to the end point if
your selection is <RIGHT>, and then return to the start point. The PTZ
Camera will start to pan anti-clockwise from the start point to the end point
if your selection is <LEFT>. Refer to the diagram below.
LEFT
(anti-clockwise
• SPEED
The item is for defining the PTZ Camera rotation speed while running
auto-pan. The speed is adjustable from 1 to 4 (10 ~ 45 degree/sec.).
• RUN AUTOPAN
After all setting related to auto-pan are completed, select this item to
execute the Auto-pan function.
• EXIT
Exit the AUTOPAN setup menu; go back to the MAIN PAGE 2 to carry on
setup of cruise.
36
save the position as the start point; the cursor will move to <END
POINT> automatically. Ensure setting the end point to complete
auto-pan setting.
NOTE: The tilt and zoom values of the start point will be recorded
and fixed for the selected auto-pan line.
Start Point
PTZ Camera
)
End Point
LEFT
RIGHT
(clockwise)
User's Manual
RIGHT