Ganz ZC-PT Series Indoor User Manual page 50

User's Manual
H CENTER
The original horizontal center of a mask zone is the center of a screen; it
is able to move a mask zone to the other position by adjusting the
horizontal value with the LEFT/RIGHT keys on the keyboard. The
camera will pan right or left according to user's control.
V CENTER
The original vertical center of a mask zone is the center of a screen; it is
able to move a mask zone to the other position by adjusting the vertical
value with the LEFT/RIGHT keys on the keyboard. The camera will tilt up
or down according to user's control.
H SIZE (00~80)
Users can adjust the horizontal size of a privacy mask through this item.
Set the H and V size to 0 can also delete the selected mask.
V SIZE (00~60)
Users can adjust the vertical size of a privacy mask through this item. Set
the H and V size to 0 can also delete the selected mask.
•
CLEAR MASK
Users can delete a preset mask zone with this item. Please follow the
steps listed below.
1. Select the mask zone that will be erased (e.g. 01).
2. Press <ENTER> to confirm the selection.
•
EXIT
Exit the PRIVACY MASK menu and go back to the MAIN PAGE 3 to
carry on time related setup.
MASK01 MENU
H CENTER
V CENTER
H SIZE
V SIZE
EXIT+SAVE
MAIN PAGE 3
IR FUNCTION
ALARM SETTING
ALARM DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
L/R
D/U
000
000
YES
AUTO
ENTER
NONE
OFF
ENTER
ENTER
ENTER
YES
49