Ganz ZC-PT Series Indoor User Manual page 45

• DWELL TIME
The DWELL TIME is duration of executing an alarm action. If select the
PRESET mode is selected, when alarm takes place, the PTZ Camera will
go to the selected preset position and stay there for a user-defined period
of time (1~127seconds/Always) when alarm takes place. If select other
modes (SEQUENCE/AUTOPAN/CRUISE) have been selected, the
camera will keep executing the selected mode (DWELL TIME: ALWAYS)
until alarm condition is released or users rotate the joystick to change the
status of the PTZ Camera.
• EXIT
Exit the ALARM SETTING menu and go back to the MAIN PAGE 3 to
carry on Privacy Mask setup.
IR FUNCTION
ALARM SETTING
ALARM DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
44
NOTE: The dwell time is only adjustable when selecting Preset as
the alarm action. When the dwell time is up, the PTZ Camera will
go back to its trigger position and recheck alarm pin status.
MAIN PAGE 3
AUTO
ENTER
NONE
OFF
ENTER
ENTER
ENTER
YES
User's Manual