Avaya 3920 Installation Manual page 34

4 Installing a Repeater
maintaining a "good" signal, or just inside the location where the signal became
weaker.
If you are installing multiple repeaters, perform this procedure for each repeater.
Figure 13: Mapping the Coverage Area of a Base Unit
As the
signal
weakens,
the noise
increases
After you map the coverage area of the base, go to
page 35.
34 Installing a Repeater in a Normal Configuration
No signal
Weak signal
(noise increasing)
Good signal
(no noise)
During a call,
walk away from
the base
Install the repeater
inside the "good"
signal range, before
the noise increases
Planning and Installation Guide
Base
"Testing the Location" on