Avaya 3920 Installation Manual page 17

Planning and Installation Guide
Perform one of the following steps:
7
— If the circle encompasses all of the areas where the Avaya 3920
Wireless Telephones will be used, you are finished determining the
location of the base units.
— If the circle does not encompass all of the areas where the Avaya 3920
Wireless Telephones will be used, perform one of the following steps:
• Select a location for all of the base units that is
"centrally located" within the area where the Avaya
3920 Wireless Telephones will be used. (This new
location should encompass all of the areas where the
Avaya 3920 Wireless Telephones will be used.)
• Identify a base unit location for the Avaya 3920
Wireless Telephones that are not covered by the
current base unit location. Draw a circle with a 160
radius around this second base unit location, and
verify that the circle encompasses those Avaya 3920
Wireless Telephones that were not covered by the
first base unit location.
Figure 5 shows multiple locations of base units for a sample
company.
Figure 6 shows locations of a base unit and repeater for
extended coverage. For more information about repeaters,
see "Installing a Repeater" on page
Determining the Location for the Base Units
2 Installation Guidelines
23.
17