Ku-Band Satellite Transceiver
Single-Thread Equipment Mounting
7.
8.
"U" bracket
with overlay
Slide two 1/4-20 nuts a short distance down each horizontal side "UNI" channel
from the rear of the SSPA. Refer to
Figure C-7. Center and square the "U" bracket to the SSPA and fasten using 1/4-
20 x 5/8" bolts, 1/4" split washers and 1/4" flat washers. Thread the 10-32 spade
screw on the interface bracket and tighten to complete mounting.
Figure C-7. SSPA Installed
Horizontal side
"UNI "channel
C–12
Revision 9
MN/KST2000AB.IOM
Interface
bracket