Making and Receiving Calls
1
2
3
4
Making a 3-Way audio or Video Conference Call
To initiate a 3-way audio conference call:
1
While on a call, press the
and a Dialer is displayed.
2
Enter the number of the third-party and select Dial.
3
Initiate the call with the third-party. To join the two calls together into a
Conference
conference, press the
4
The conference indicator light will come on. On a video call, you will be able
to see all callers on your screen!
When using Video Conferencing, remember the following:
• All three parties must be using an IRIS V during the call.
• It can take up to three minutes for audio and video synchronization to fully
tune.
• The person who is originating the video conference should set their
Internet connection speed to low bandwidth to ensure the clearest
connection among the three phones.
•
You can check your bandwidth setting, by going to the Settings menu,
selecting Network and setting your Bandwidth to Low.
putting a Call on hold
To put a call on hold, press the
The other party receives Hold indication.
To retrieve the call, press the
Conference
key. The current call is placed on hold
key again.
Hold
key. The Hold indicator light comes on.
Hold
key again. The Hold indicator light turns off.
®
ChapTer 4
21