AeroWorks Extra 260 Manual page 5

Receiver Power System:
The Aeroworks 20cc-30cc Power Package is recom-
mended. The package consists of the following
items:
◊
1 -
Fromeco Sahara Regulator w/Deans in 2 JR out
◊
1 -
Fromeco 2600mah Li-Ion Battery w/ Deans
◊
1 -
Smart-Fly Super Switch HD w/ Deans
Ignition Power System:
If using the DLE 30 or any other gas engine the
Aeroworks Ignition Power System is recommended
◊
1 - Fromeco 2600mah Li-Ion Battery w/
Universal Connector
◊
1 - Smart-Fly Ignition Regulator
◊
1 - MPI charge switch
Aeroworks 30cc Freestyle Extra 260 Assembly Manual
Recommended Extensions:
22 AWG extensions are recommended throughout
the 30cc Freestyle Extra 260 QB-L. The following
sizes will be used:
◊
2 - 3" Extensions For Receiver to Ailerons
◊
2 - 6" Extensions For Ailerons
◊
2 - 24" Extensions For Elevators
TOOLS & ADHESIVES NEEDED
TO COMPLETE
•
Allen wrenches US and Metric.
•
Electric drill and selection of bits
•
Razor saw
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron and covering sock
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Rubbing alcohol
•
Ruler and tape measure
•
Scissors
•
T pins
•
Wire Cutters
•
Blue Loctite
•
CA kicker (optional)
•
Thick, Thin and Medium CA
•
Rubbing alcohol
•
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
5