AeroWorks Extra 260 Manual page 43

3. Gather (2) 6-32 wing mounting bolts, (2) #6 rub-
ber backed washers and (4) hairpins for prepara-
tion of mounting the wings.
4. Slide the wing tube in the fuse wing tube sleeve.
Slide the wings on the wing tube and plug in the
aileron servo connectors. Slide the rubber
backed washers on the wing mounting bolts and
insert bolts through the fuse side and into the
wing root blind nuts. Tighten snugly but do not
over tighten and crack the fuse or wing root
wood.
Aeroworks 30cc Freestyle Extra 260 Assembly Manual
5. Bending the top of the hairpin out at a 45 degree
angle will allow the pins to be installed and re-
moved easily.
Bend at dotted
line
6. Install hairpins into both front and rear
aluminum anti-rotation wing dowels to provide
additional security.
7. Gather (4) 4-40 stab mounting bolts and (4) #6
small rubber backed washers, these will be used
to secure the stabs to the fuse.
8. Slide the stab tube in the fuse stab tube sleeve.
Slide the stabs on the stab tube and connect
pushrod to servo arm. Slide the rubber backed
washers on the stab mounting bolts and insert
bolts through the stab mounting tabs and into the
fuse blind nuts. Tighten snugly but do not over
tighten and crack the stab mounting tabs or the
fuse sides.
43