Disassemble The Primary Air Control - Aarrow Signature Inset 5 Operating & Installation Manual

Fig. 10. Positioning The Glass
Fig. 11. Tightening The Glass Clip
Please Note—This should be carried out when
the fire is cold and unlit.
Aarrow Signature Inset 5
SERVICE & MAINTENANCE
FIRE DOOR PRIMARY AIR INLET
Once a year a check is required to inspect the
primary air inlet assembly, located at the base of
the fire door.
•
Lift the door assembly from the stove body
and place on a level work bench, with the
rear face upper most.
•
Remove the 2 x no. fixings.
•
Working from the front, withdraw the oval
assembly from the door casting.
•
Clean the air slots within the door casting
and slider plate.
•
Place the oval assembly into the door oval
aperture and fix from the rear of the door.
See Fig 12
Rear Of Oval
Fig. 12. Rear Of Oval / Slider Assembly
Slider
Page 19