Fuel Retainer - Aarrow Signature Inset 5 Operating & Installation Manual

FUEL RETAINER BAR
A fuel retaining bar is supplied with the Signature 5 stove (Fig 17).
For fitting please follow steps 1 to 3 detailed below..
Please Note—This should be carried out when the stove is cold
and unlit.
Lower mounting
lugs
Installing the cast fuel retainer
Step 1
Step 2
Aarrow Signature Inset 5
OPERATING INSTRUCTIONS
Fig 17
Step 3
Step 1,
Insert the cast fuel retainer into the fire box, through
the door aperture at a slight angle as shown.
Step 2,
Lower the fuel retainer bar so as to engage the lower
lugs into the mounting slots in the stove body
as shown
Step 3,
Ensure the fuel retainer is sat fully down onto the front
landing as shown
Page 25