Hearth - Aarrow Signature Inset 5 Operating & Installation Manual

INSTALLATION
The stove should fit into a standard 16" or 18" open fire place without the removal of the
fire-back (chair brick), provided the same complies to BS 1251:1987.
Some minor adjustment may be required to ensure a good fit. The decorative fire surround
should be manufactured from non-combustible materials only.
Fig 1
Signature 5 stove cross sectional
view, installed into a standard
16" or 18"chair brick
Decorative fire surround
( Non-combustible )
Non-combustible sealing rope
( See page 12 )
Superimposed hearth
Page 10
Throat forming lintel
Constructional hearth
Insulating infill
Fire back
To BS 1251:1987
Expansion joint
Thin straw board
or corrugated
cardboard etc.
Aarrow Signature Inset 5