Panasonic KX-NCP500 User Manual page 40

1.2.4 When the Dialled Line is Busy or There is No Answer
For an extension receiving a message waiting indication
To check the left message and call back
PT/PS
While on-hook
MESSAGE
Press MESSAGE
until the desired
extension appears.
To call back
PT/SLT/PS/KX-HGT100
Off-hook.
To clear message waiting indications left on your extension
PT/SLT/PS/KX-HGT100
Off-hook.
•
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
•
The display shows the messages starting with the most recent call.
•
At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then
press the soft button.
•
On your PT, you can establish one or more Message for Another Extension buttons. These
buttons can accept the message waiting notification of other extensions or various incoming
call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
•
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
•
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
40 User Manual
Off-hook.
MESSAGE
OR
7 0
Press MESSAGE or enter
7 0
Enter 70. Enter 0.
Talk.
2
70 and then 2.
your
0
extension no.
Dial your
extension number.
Talk.
C.Tone
On-hook.