Panasonic KX-NCP500 User Manual page 176

1.13.1 Using the Call Log
•
The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
•
If your call is answered by another extension, the caller's information is recorded on the
displays of both your extension and the answering extension.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to
"3.1.2 Settings on the Programming Mode".
•
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
KX-NT300/KX-NT500/KX-DT300/KX-T7600/
KX-TCA185/KX-TCA285/KX-TCA385
While on-hook
Press Left.
•
The following PSs can display outgoing call log information to other extensions (including
TIE) with same information as a PT connected to the PBX.
–
•
PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
•
For details about referencing the outgoing call log using the PS's navigator key, refer to the
PS's documentation.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
176 User Manual
Press Up or Down
until desired number
appears.
KX-TCA185/KX-TCA285/KX-TCA385
REDIAL
Press REDIAL
until desired number
appears.
Off-hook.
Off-hook.