Stitch Density - Bernina artista 165 Embroidery Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.___
• Select alphabet #1 - Drifter - and the letter "B".
• Select Layout 1 and increase the size of the letter to 200%.
• Touch Temporary Save.
• Duplicate the design two more times so that there are three "B"s on screen.
• Move and Temporary Save one "B" to the right and the other to the left, leaving one in the center.
• Retrieve the "B" on the right, then select Layout 2.
• Alter the stitch density to 160%.
• Select Layout 1, then touch Temporary Save.
• Retrieve the "B" on the left, then select Layout 2.
• Alter the stitch density to 40%.
• Select Layout 1, then touch Temporary Save.
• Touch OK to process the design.
• Embroider the design.
• Trim and mount the sample on the following page, noting the stitch density of each design.
NOTE: Notice that the satin stitches moved closer together or further apart, while the straight
stitches under the design remained unchanged. Stitch density changes affect both satin
stitching and step stitching.
BERNINA
M Y
ASTERING OUR
BERNINA

STITCH DENSITY

Fabric: Firm fabric and stabilizer, 11" x 13"
Needle: Embroidery
Thread: 40 weight embroidery, choose a
variegated thread
Presser Foot: Embroidery Foot #15
Module Designs: Alphabet (Drifter), Collection 5
8/27/02
®
®
artista 165 Embroidery
S A
ECTION
artista 165 Embroidery/23