Bernina artista 165 Embroidery Owner's Manual page 39

M
ASTERING
Y
OUR
BERNINA
®
• Select design #17 - poppy - from Collection 5.
• Select Layout 1 and reduce the size to 80%
• Using the positioning arrows, move the design down to the bottom of the hoop.
• Select Temporary Save.
Add Arched Lettering to the Design
To add curved lettering to the design, you must select, rotate, and place each letter individually,
using Temporary Save to store each letter. For greatest accuracy, use the outline boxes (rather
than the Show function) to arrange letters.
• Select Menu.
• Select alphabet one - Drifter.
• Select the lower case "p"; place it to the left of the vertical placement line, rotating it to fit on the
circle template.
• Touch Temporary Save.
• Touch Menu, then select the lower case "o"; place it next to the "p" as shown in the following picture.
• Rotate the "o" to fit the circle template.
• Touch Temporary Save.
• Continue in this manner, adding letters to complete the phrase "poppy".
• After placing each letter, remember to touch Temporary Save.
• Select Retrieve; fine tune letter placement using the Show function.
• Touch Temporary Save after each adjustment.
• Touch OK to process the design.
• Embroider the design.
• Trim and mount the sample on the following page.
Note: Do not delete this design. Continue with the following two exercises for saving designs.
BERNINA
M Y
ASTERING OUR
BERNINA
ARCHED LETTERING
Fabric: Firm fabric and stabilizer, 11" x 13"
Needle: Embroidery
Thread: Isacord embroidery thread
Choose thread colors to match design
Presser Foot: Embroidery Foot #15
Module Designs: Motif #17 (poppy), Collection 5
Drifter font, Collection 5
8/27/02
®
®
artista 165 Embroidery
S B
ECTION
artista 165 Embroidery/39