Detect Paper Mismatch
NOTE:
When "DETECT PAPER MISMATCH" is set to "OFF", the setting of the "Auto Continue" is
not applicable. For further details about "Auto Continue," see "TOSHIBA STATUS
DISPLAY FUNCTION - [Printer Setting] Tab."
1
In Standby Mode, press
Press
2
select DETECT PAPER MISMATCH.
DETECT PAPER MISMATCH is outside of the
Message Display Panel. Use
display the desired item.
3
Press
the DETECT PAPER MISMATCH to
OFF.
Press
the DETECT PAPER MISMATCH to
ON.
4
The new setting is accepted.
The Operation Completed message appears.
After 2 sec., the display returns to the PRINTER
MODE menu.
94
key.
on the Dial Keypad to
or
on the Dial Keypad to set
on the Dial Keypad to set
PRINTER MODE
3.FORM FEED
4.TEST PRINT
5.DETECT PAPER MISMATCH
to
DETECT PAPER MISMATCH
1.OFF
2.ON
DETECT PAPER MISMATCH
Operation Completed