Toshiba e-Studio16 Operator's Manual page 66
Print kit local setup
Hide thumbs
Also See for e-Studio16:
- Operator's manual (252 pages) ,
- Administrator's manual (134 pages) ,
- Specification sheet (14 pages)
Table of Contents
Advertisement
Optional Cassette
This selects how the optional cassettes are installed.
NOTE: "Not Installed" is selected as a factory default.
Not Installed
Select this when no optional cassettes are installed.
Cassette 2
Select this when the optional paper feed unit is installed.
Cassette 3
Select this when both the optional paper feed unit and the optional paper feed pedestal are installed.
Cassette 4 (e-STUDIO20/25 Series only)
Select this when optional Paper feed unit and the optional Paper feed edestal with the Cassette module are
installed.
Large Capacity Feeder (e-STUDIO20/25 Series onlly)
This selects how the Large Capacity Feeder is installed. The Large Capacity Feeder is an option for e-STUDIO20/
25 Sereis only
NOTES:
• The item can be selected only when [Cassette 2] is selected at [Optional Cassette]
• [Not Install] is selected when shipped from the factory.
Not Installed
Select this when no Large Capaicty Feeder is installed.
LCF
Select this when the Large Capacity Feeder is installed.
Stack Feed Bypass
Selects this when the Bypass Tray is installed.
NOTE: "Not Installed" is selected as a factory default.
Not Installed
Select this when no Bypass Tray is installed.
Stack Feed Bypass
Select this when the Bypass Tray is installed.
Others
Select this when other optional devices are installed.
NOTE: "Not Installed" is selected as a factory default.
Not Installed
Select this when no other optional devices are installed.
Offset Stacker
Select this when the Offset Stacker is installed.
Job Separator
Select this when the Job Separator is installed.
Finisher (e-STUDIO20/25 Series only)
Select this when the Finisher is installed.
Optional Device Installed Status
The status of optional cassettes and the other optional devices are indicated in the illustration.
SUPPLEMENT:
If your computer is running Windows NT 4.0, Windows 2000, or Windows XP, it is
necessary to log on with "Administrators" or "Power Users" group privileges to setup the
"Options". Refer to the Windows Manual for log-on details.
64
Advertisement
Table of Contents
