Media Type; Number Of Copies - Toshiba e-Studio16 Operator's Manual

Location
This selects the source for feeding paper. When different sized paper is loaded on several paper sources, select a
paper source that correlates with the appropriate size.
NOTE: It is set to "Auto Select" as a factory default.
Auto Select
Automatically selects the paper set in the printer according to the document size for feeding.
Cassette1
Feeds paper from the Upper Recording Paper Tray.
Cassette2 (Optional)
Feeds paper from the Middle Recording Paper Tray.
Cassette3 (Optional)
Feeds paper from the Lower Recording Paper Tray.
Cassette4 (Optional for e-STUDIO20/25 Series only)
Feeds paper from the cassette module at the Lower Recording Paper Tray.
Stack Feed Bypass (Optional)
Paper is fed from the Bypass Tray.
Large Capacity Feeder (Optional for e-STUDIO20/25 Series only)
Paper is fed from the Large Capacity Feeder.
Orientation
This sets the paper printing direction, to either "Portrait" or "Landscape."
NOTE: It is set to "Portrait" as a factory default.

Media type

This sets the media type of the paper.
NOTE: It is set to "Plain paper" when shipped from the factory.
Plain paper
Select this when using general plain paper.
Transparencies
Select this when using transparent sheets. This is available only when the Bypass Tray is installed.
Labels
Select this when using label paper. This is available only when the Bypass Tray is installed.
Cardstocks
Select this when using cardstock paper. This is available only when the Bypass Tray is installed.
Letter Head
Select this when using letterhead paper. This is available only when A4 or LETTER is selected for the Paper Size.

Number of Copies

This sets the number of printed copies.
You can set any integer from 1 to 999.
NOTE: It is set to "1" as a factory default.
40