Paper Size - Toshiba e-Studio16 Operator's Manual

Paper Size

This selects the size of paper to be used for printing. The paper sizes vary according to the country version of the
machine.
For European version:
A3
A4
A5
B4
LETTER
FOLIO
Paper Destination
This selects the destination of the output.
NOTE: "STANDARD" is selected as a factory default.
STANDARD OUTPUT TRAY
Select this to eject the printed paper to the Paper Output Tray.
JOB SEPARATOR UPPER TRAY (Available only when the Job Separator is installed.)
Select this to eject the printed paper to the Upper Tray of the Job Separator.
JOB SEPARATOR LOWER TRAY (Available only when the Job Separator is installed.)
Select this to eject the printed paper to the Lower Tray of the Job Separator.
FINISHER TRAY1 (Available only when the Finisher for e-STUDIO20/25 Series is installed.)
Select this to eject the printed paper to the Upper Tray of the Finisher.
FINISHER TRAY2 (Available only when the Finisher for e-STUDIO20/25 Series is installed.)
Select this to eject the printed paper to the Lower Tray of the Finisher.
Orientation
This sets the paper printing direction to either "Portrait" or "Landscape."
NOTE: It is set to "Portrait" as a factory default.
Copies
This sets the number of copies to be printed.
An integer in the range from 1 to 999 can be set.
NOTE: It is set to "1" as a factory default.
Duplex
Set this to print on both sides of the paper. The Duplex Unit must be installed when it is set to ON.
NOTE: It is set to "OFF" as a factory default.
Binding
This selects whether or not the Binding Margin is set on the paper to be printed.
Long Edge
Select this when the gutter is set on the longer edge of the paper to be printed.
Short Edge
Select this when the gutter is set on the shorter edge of the paper to be printed.
74
For North American version:
A4
LETTER
LEGAL
LEDGER
COMPUTER
STATEMENT