Μclinux On The Blackfin Processor 3-Day Workshop; Processor Documentation; Blackfin Processor Manuals; Hardware Reference Manuals - Analog Devices Blackfin Getting Started

Hide thumbs Also See for Blackfin:

Table of Contents

Available Support

µClinux on the Blackfin Processor 3-Day Workshop

This course is an introduction to all aspects of programming with µClinux

based on the Blackfin processor STAMP board. The course is presented by

System Design and Consulting Services in various locations.

The course covers the following subjects: development tools, compiler,

linker, Blackfin processor assembler and debugger, bootloader (U-boot),

µClinux source distribution, µClinux libraries, Linux boot-up, Linux

kernel 2.6.x, FLASH memory and FLASH file systems, introduction to

device drivers, µClinux debugging, network applications, and example

user applications. For further information, go to:

http://www.analog.com/processors/training/workshops

/uClinuxws.html

Three documents accompany each Blackfin processor: a data sheet,

a hardware reference, and an instruction set (or programming) reference.

These documents enable you to design software and hardware.

Two kinds of manuals provide detailed information about the Blackfin

processor: the Hardware Reference Manual and the Instruction Set

Reference.

Each processor's hardware reference manual provides architectural infor-

mation about that particular Blackfin processor. The descriptions cover

functional blocks, buses, and ports, including all features and processes

that they support.

3-6

Getting Started With Blackfin Processors

Table of Contents