Adsp-Bf533 Stamp Board - Analog Devices Blackfin Getting Started

ADSP-BF533 STAMP Board

The ADSP-BF533 STAMP µClinux kernel board support package pro-
vides a cost-effective environment to develop embedded systems around
ADSP-BF533 Blackfin processors. The STAMP board is specifically
designed to support the development and porting of open source µClinux
applications and includes the full complement of memory along with
serial and network interfaces. A variety of available daughterboards plug
into this board, adding interface functions such as audio, video, and ana-
log input or output.
Besides an ADSP-BF533 500 MHz Blackfin processor, the board
includes:
• 128 MB SDRAM (64M x 16 bits)
• 4 MB FLASH memory
• SMSC LAN91C111 Ethernet MAC/PHY
• RS-232 serial interface
• I/O connectors for these Blackfin peripherals: PPI, SPORT0 and
SPORT1, SPI, timers, IRDA, and two-wire interface
• JTAG interface for debug and FLASH programming
• Three LEDs and three push buttons
Together with the ADSP-BF533 STAMP development board, the package
includes a recent copy of the open source development tools (GCC 3.x)
and the µClinux 2.6.x kernel. It also includes a CD with documentation
and the board schematics, Gerbers, and layout files. The latest version of
all the tools can be found on the
site. This Web site also hosts open source application projects based on
the STAMP board and daughterboards (such as a networked audio media
node), a networked oscilloscope, and a Blackfin XMAME game console.
Getting Started With Blackfin Processors
The Evaluation Process
http://blackfin.uclinux.org/
Web
2-31