Using Isdn Supplementary Services; Activating Isdn Caller Id Restriction - iPECS 7016D User's Operation Manual

iPECS
7016D & 7024D Phone
You must have a
Button program procedures. Once active, you may dial into the ISDN
for services; however, actions other than dialing will deactivate the
'Keypad message' operation.
OPERATION
To activate Keypad Facility operation;
• Press the eypad
K
• Dial as desired.
To deactivate Keypad Facility operation;
• Press eypad acility,
K F
or
• Press a Feature or Flex button.

9.2.2 Using ISDN Supplementary services

ISDN service providers may incorporate features similar to those of
Centrex. These ISDN Supplementary services are provided on a
subscription basis and, as with Centrex, are accessed using the Flash
feature.
iPECS Phone users notify the ISDN of a feature request using the
FLASH Soft button. An ISDN line can be placed on Hold and a
second call placed on the line. You may then alternate between the
two held calls (Broker Call) using the
conference can be established using the FLASH and CONF Soft
buttons. The conference can also be placed on hold.
OPERATION
While on an ISDN CO line, to access ISDN Supplementary services;
• Select the FLASH Soft button,
• Press Hold/ ave, and Select the CONF Soft button, or CO line
S
assigned button to activate the desired feature.

9.2.3 Activating ISDN Caller Id restriction

iPECS Phone users can restrict the transmission of Caller Id to the far-
end. This may be a subscription service of your carrier. Separate Flex
buttons are required to activate outgoing (Connected Line) and
incoming (Calling Line Id) id restriction.
eypad acility button assigned using the Flex
K F
acility assigned button to switch to keypad mode,
F
old/
H S
39
User Operation Guide
ave button. An ISDN line
Elimina