Using Answering Machine Emulation (Ame) - iPECS 7016D User's Operation Manual

iPECS
7016D & 7024D Phone

3.3 Using Answering Machine Emulation (AME)

When a call is sent to your voice mail-box, you can screen the call as
you would with a normal Answering Machine. The caller's voice is
played over your speaker while the message is recorded. There are
two methods of notification and call screening provided, Ring or
Speaker mode.
In the Ring mode, you are notified by flashing of the AME (Answering
Machine Emulation) Flex button. You may press the Flex button to
hear the caller as the voice message is stored. In the Speaker mode,
when the call is sent to the Voice Mail-box, the caller's voice is
automatically broadcast over the speaker of your iPECS Phone.
You may terminate the screening leaving the caller in voice mail to
record a message, talk with the caller and record the conversation in
the mail-box, or answer the call and disconnect the Voice Mail.
OPERATION
To assign an AME button:
Ring Mode rans/
T
Speaker Mode
To screen a call in the Ring mode;
• Press the flashing
the station speaker and stored in the Voice Mail-box. In the Speaker
operation mode, broadcast is automatic.
To stop the voice broadcast and leave the caller in Voice Mail;
• Press the illuminated
To talk with the caller and record the conversation in Voice Mail;
• Press the SPEAK Soft button.
To answer the call and cancel the voice message;
• Press the illuminated
Voice Mail disconnected.
gm + + 564 + 0 +
P FLEX
rans/ gm +
T P FLEX
button, the caller's voice is broadcast over
AME
peaker button.
S
button, the caller is connected and the
AME
9
User Operation Guide
old/ ave
H S
+ 564 + 1 + old/ ave
H S