Auto Answer; Selecting A Language - Geemarc AMPLIDECT 280 Manual

Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
1. Perform steps 1 and 2 of paragraph " Terminate
HS ".
2. Use the key to choose Modify PIN menu,
press the Select soft key.
3. The display shows "PIN?". Enter the current
PIN, then press the Next key. If the old PIN
code is validated, you will be prompted to
enter a new PIN code. If the old PIN is not
validated, a warning beep will sound and you
will be returned to the Modify PIN menu.
4. Enter the new PIN, press the Next key. You
will be requested to confirm the PIN code.
Enter the new PIN again then press the Save
soft key to confirm and exit.
36
BS Reset
This function allows you to reset the Base
setting to the factory default.
1. Perform steps 1 and 2 of paragraph " Terminate
HS ".
2. Press the key to choose BS Reset
menu, press the Select soft key. You will be
prompted to enter the PIN code.
3. Enter the PIN code (the default PIN is
0000), then press the Reset soft key. If the
PIN code is validated all Base settings will
b e r e t u r n e d t o t h e f a c t o r y d e f a u l t ,
otherwise the settings will remain.
Result: After resetting, the base will be reset
and the handset will return to Standby
mode.

Auto Answer

With this feature, you can answer a call by
just picking up the handset from the base
without pressing any key.
1. Press the Menu soft key.
2. Press the key repeatedly to choose
HS Settings, press the Select key.

Selecting a Language

The Handset supports multiple predefined
languages You can change the language used .
to display the menu messages.
1. Press the Menu soft key.
2. Press the key to choose H S Settings
then press the Select soft key .
3. Use the key to choose Auto Answer,
then press the Select soft key.
4. Use the key to choose On/Off to enable/
disable the function, then press the Save soft
key, you will hear a confirm beep.
Note:
When the answering machine starts
w o r k i n g , t h i s f e a t u r e w i l l
deactivated.
3. Use key to choose Language, then press
the Select soft key.
4. The languages will be displayed. Use the
key to scroll through the options.
language will be displayed in its own native
translation.
, 5. Press Save soft key to select the required
language and you will hear a confirm beep.
b e
Each
25