Muting The Microphone; Amplification Function; Calling With More Than One Handset - Geemarc AMPLIDECT 280 Manual

Muting the Microphone

During a conversation, you can temporarily
switch your phone's microphone off, so that the
other party cannot hear you.
Example: You want to say something to another
person in the room but do not want
the other party to hear you.

Amplification Function

Your phone is equipped with a specialized
amplification function designed to fit your
needs. During a conversation you can adjust
the + or - control on the left side of the
handset and use the key on the right
side. You can also adjust the control to fit
the levels to your hearing requirements. The
selected volume will be displayed on the LCD.
18
To mute your microphone, press the Mute soft
key during the conversation. The "Call Muted"
appears on the LCD.
To unmute the microphone, press the Mute soft
key again. You will restore the normal condition.
When you press the key in receiver mode
during a conversation, the Amplify indicator on the
handset lights on. If you press the key again,
the indicator will go out.
You can also select the earpiece volume or the
speaker volume by the Audio Setup in Menu
under HS Settings, as described in page 38.

Calling with more than one Handset

If you have more than one handset registered to
the same base, you can make internal calls and
transfer an external call between the registered
handsets.
Making an internal call
1. Press the key, the LCD displays as follows,
then enter the number of the handset you
want to call.
Intercom
1 2 3 4 5
2. If the destination handset is not available, the
handset will return to standby mode. If the
handset entered is valid, the called handset
will ring and display HSX Calling. The handset
user can press the key to answer the
internal call.
3. At the end of your conversation, press the
key.
Note:
During the internal call, if an external comes
in, the LCD will show the caller's number.
You should press the key to end the
internal call first then press the key to
answer the call.
Call transfer between handsets
You can transfer an external call between the
handsets that are registered to the same base.
1. During an external call, press the key and
then the number of the handset you want to
transfer the call to.
2. If the called party can answer your call, he/she
can press the key to talk with you. At
this time you can inform him/her of the
incoming call.
3. When the called handset answers, press the
key or replace the handset to the base
to complete the transfer.
43