Receiving A Call - Geemarc AMPLIDECT 280 Manual

Setting up a 3-way conference call
When you have both an external call and an
intercom call in progress, you can set up a three-
way conference call, like this:
1. During an external call, press the key and
then the number of the handset you want to
join the 3-way call.
2. The called party press key to answer.
3. The calling party can press the
start the 3-way call.
4. Either of the two internal handsets can press
the key to leave the conference call at
any time.
Note:
If one of the handsets drops the conference
call, the remaining handsets will continue the
conference.
44
key to

Receiving a Call

When a call is received, t he New Call
information will appear.
If the caller can be identified, the caller's
phone number is displayed. If the caller
cannot be identified, only the New Call
information displays. If you have a voice
message, the "MSG WTG ON" and
will be show on the LCD.
1. To answer the call, press the key. If
you have activated the Auto Answer
function, when the handset is on the
base, simply lift it up to answer.
2. You can speak. To end the call, either
press the k ey or replace the handset
on the base.
Result: After you hang up the call, the LCD
displays the call duration.
Notes:
You can select the ringer volume by using the
Vol +/- key when the phone rings with an
incoming call.
icon
If you want to delete the
Up key in standby mode, then press and hold
the 4 key. After that press the
ghi
return to standby mode. (The handset must
be registered to the base.)
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the calling.
icon, press the
key to
17