Make A Call From Direct Access Memory; Answer A Call - Geemarc COMBI DECT 295 Photo User Manual

4.2

Make a Call from Direct Access Memory

Using a handset:
On the handset, press and hold the picture memory until to hear a beep after about 3
seconds.
Or
Press and press on the picture memory to dial the number pre-stored into the keys
respectively.
Using the base:
In idle mode, press any direct memory key in w hich a number is stored, the phone w il l
automatically dial out the telephone number stored in the selected memory key in
speakerphone mode.
OR
Lift the corded handset or press SPEAKER, and then press any direct memory key in
w hich a number is stored to dial the number pre-stored into the keys respectively.
NOTES:
•
You need to set the direct access number first. See Section 7.1 for details.
•
If no number is stored, you w ill hear beeps.
4.3

Answer a Call

Using a handset:
If the handset is not on the charging cradle:
When the phone rings, press
speakerphone.
If the handset is on the charging cradle: When the phone rings, pick up the handset to
answ er a call.
Using the base:
When there is an incoming ring, pick up the corded handset or press SPEAKER
to answ er the call.
or to answ er a call. Press it again to turn on the
17